Publicidad
Idiomas disponibles
Idiomas disponibles
ELDA - CORONA
5.2.2. PACKING REMOVAL
Use suitable equipment to remove the boards or wooden parts of the unit's
packing.
To remove the packing, follow the operations described below:
Step
Action
1
Remove the crate cover and the 4 side walls.
2
Undo the 4 screws securing the base to the packing.
3
Remove the unit from the pallet and proceed with the operations described in par. "Positioning".
Disposal or recycling of the packing must be carried out by the end-user in
compliance with the current local regulations, ensuring that it is not within the
reach of children or disabled people.
The unit must always be handled upright, paying attention to the moving parts of
the product. Particular attention must be paid to ensure that the door and its glass
are protected from mechanical impacts which compromise their integrity.
In any case, handling of the products must be done with caution. If possible,
unpack the product near the area where it will be installed.
If the product has to connected to an exhaust pipe that crosses the rear wall (to
enter the flue), be extremely careful not to force entry.
EN
A73023860 - Rev 01 - 06/2023
183
Publicidad
