American Standard Aspirations Flash TU061740 Manual De Instrucciones página 3

INSTALLATION INSTRUCTIONS
1A
ROUGH-IN DIMENSIONS
FINISHED
WALL
Ø7-7/8"
(Ø199 mm)
CARE INSTRUCTIONS:
•
To keep your new faucet looking new, please
follow these simple care instructions:
DO:
– Simply rinse the faucet clean with clear
water.
– Dry the faucet with a soft cotton cloth.
DO NOT:
– Do not use any abrasive cleaners, cloths, or
paper towels.
– Do not use any cleaning agents containing
acids, polish abrasives, or harsh cleaners or
soaps.
•
Regular and routine cleaning will reduce the
need for heavy cleaning and polishing.
If heavy cleaning is required, the following
procedures are recommended:
2-3/8"
(60 mm)
2-11/32"
(59 mm)
8-3/16"
(208 mm)
•
Remove as much surface dirt and film using clear
water and soft cotton cloth (as described above).
– Use any of the following to remove tough surface
film and build-up:
– Mild liquid detergents
– Clear ammonia free liquid glass cleaners
– Non-acidic, non-abrasive gentle liquid or fully
dissolved powder cleansers mixed according to
manufacturers directions
– Non-abrasive liquid polishers
•
Once clean, rinse faucet again with clear water to
thoroughly remove cleaner or polish and blot dry
with a soft cotton cloth.
Failure to follow these care instructions may
damage the Faucet's finish.
7-7/8"
(199 mm)