MOTOAIRBAG S164S Manual De Instrucciones página 26

EN
MOTOAIRBAG S164S – S11 (MAB v3 – MAB v2.0 Plus – MAB vZero Plus)
5
- CARE AND MAINTENANCE
5.1 PERIODIC CHECKS
Perform the following checks frequently and at each activation.
MOTOAIRBAG
■ Check
■ Check MOTOAIRBAG
system.
■ Check the activation cable for damage.
■ Check the cartridge for rust/oxidation or damage.
■ Check that the cartridge is securely screwed to the gas generator (only check manually
without tools).
■ Check that the D-ring belt on the seat is not damaged.
■ Check that the D-ring belt or the tower is well secured to the motorcycle.
■ Check that the seat is properly secured to the motorcycle
■ Check that the zipper allowing access to the
■ For the MAB v2.0 Plus model: check that the side velcro is closed (fig. 10-11)
■ For the "FAST LOCK", perform check list 4.3.2
5.2 STORAGE
■ Store
■ Do not store
■ Keep
■ Store
30°
30°
5.3 WASHING INSTRUCTIONS
Washing instructions.
■ Use warm water (30°C) with
30° 40°
mild detergent.
■ Do not use solvents or abra-
40° 60°
sive cleaning products.
■ Do not spin.
CLEANING THE TEXTILE PART
Use a damp cloth with water and a neutral detergent (no chlorine, no Solvents)
on dirty parts.
For a thorough and complete washing contact the manufacturer.
26
®
for damage or signs of wear on the textile part.
® for damage or signs of wear on the
MOTOAIRBAG ®
MOTOAIRBAG
30°
MOTOAIRBAG ®
MOTOAIRBAG ®
40° 60°
40° 60°
60°
MOTOAIRBAG
dry in a dry place at temperature below 45°C.
® near heat sources (naked flames, heaters, etc.).
40° 60°
away from sharp or pointed objects.
without weights on top.
■ Do not tumble dry.
■ Do not iron.
■ Hang the textile part to dry.
MOTOAIRBAG
®
airbag system is closed.
® airbag