Honeywell CO25AE Manual Del Usuario página 13

USE & OPERATION
SWING
Press the SWING button. The indicator light will come
on and the louvers will begin to move from right to left
automatically.
Manually adjust the horizontal louvers to change vertical
airflow.
Low Water Alarm
(Will activate in COOL Only mode)
The unit is equipped with a low water sensor. When water in
the tank is below the minimum level, you will hear 10 beeps
Tank Empty
and the TANK EMPTY LED indicator will flash continuously. At
the same time, the power to the pump inside the unit will be cut
off to protect the life of the pump.
To disengage the alarm function, turn off and unplug the unit
from the power outlet. Fill the tank with water above the
minimum level.
To turn off the Low Water Alarm and continue to use the unit as
a normal fan, without evaporative cooling function, turn the unit
off, then on again. If COOL is pressed again without filling the
tank with water, the Low Water Alarm will activate again.
11