Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURES
ES
▶Power: 50W
▶Speeds: 3 levels
▶Fixed or oscillating position
PT
▶security grill
▶Blade diameter: 40cm
▶Heights: min.100 - max.120cm
EN
▶Fixed or rotating position 75º
▶Oscillating
FAN PARTS
FR
1. fan base
2. Plastic trim - union with the base
3. Telescopic lower tube (white)
4. Fixing ring
5. Telescopic top tube (chrome)
6. Fixing screw
7. Switch panel
8. Panel body
9. Engine body
10. Swing Button
11. Motor shaft
12. Back of the grille
13. Washer for fixing the grid
14. Propeller
15. Propeller fixator
Instruction manual
16. Front of grille
17. Lid
ASSEMBLY INSTRUCTIONS
1. Remove all packaging carefully, avoid scratching plastic
covers with scissors or knives.
2. Assemble the base of the fan, joining it to the lower
telescopic tube.
3. Place on the motor shaft following the following order: the
rear part of the grille, the propeller and the front part of the
grille using the corresponding nuts and washers to hold the
parts together as shown in the upper diagram.
4. To fix both grids use the ring, and fix it with the security
screw.
5. Finally insert the part of the propeller with the motor into
the telescopic tube and then use the fixing screw to hold it
all.
Ref. 33910
Publicidad
