Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
WARNING:
Failure to identify and replace damaged or worn
parts can cause serious personal injury. Inspect
the chainsaw regularly. Regular inspection
is the first step to proper maintenance.
Follow the guidelines below to maximize
safety and satisfaction. Have any damaged or
excessively worn parts replaced immediately.
WARNING:
Always remove the battery pack and let the
product completely cool down before performing
cleaning and maintenance work!
Always wear gloves to reduce the risk of injury
when operating this unit.
Only perform cleaning and maintenance work
according to these instructions! All further works
must be performed by a qualified specialist!
REPLACING/CHANGING THE
SAW CHAIN AND GUIDE BAR
Exchange a worn guide bar/chain saw refers to
"INSTALLING THE SAW CHAIN AND THE GUIDE BAR".
Only use the specified parts for replacements.
SHARPENING THE SAW CHAIN
Do not sharpen the saw chain by yourself, unless you are
experienced in doing so. It is recommended to have the
chain saw sharpened by an authorized service.
CLEANING
• Remove the battery.
• Remove wood chips and other debris from the battery
port. Clean dirty contacts with a soft, dry cloth. Dirt or oil
can cause a poor electrical connection, resulting in loss
of power.
WARNING:
There are no user serviceable parts inside the
battery pack. Do not disassemble.
• After use, clean debris from the saw chain and guide bar.
Wipe power head with a clean cloth moistened with a mild
soap solution. Never use harsh cleaners or solvents.
EN - 20
• Always clean out wood chips, saw dust and dirt from the
bar groove when replacing saw chain.
• Ensure that the chain tensioning gear is free of wood
chips and other debris.
NOTE:
When cleaning the chainsaw powerhead, do not immerse in
water or other liquids.
TRANSPORT
• Remove battery pack from the chainsaw.
• Install the guide bar cover.
• If desired, drain the bar and chain oil to reduce seepage.
• Carry saw with bar and chain facing behind the operator.
• Tools can shift during transport. Ensure the tool is secure
and cannot fall or move into contact with people or
property.
STORAGE
• Remove the battery pack from the chainsaw.
• Clean chainsaw thoroughly as described above.
• Install the guide cover and place an absorbent pad under
the bar.
• Store in a dry place.
• Keep out of reach of children or pets.
• We recommend using the original package for storage or
covering the product with a suitable cloth or enclosure to
protect it against dust.
NOTE:
To prolong battery life, never store battery pack in a
completely discharged condition. Make sure the battery
pack is charged once per year or when the LED indicator
shows only one light.
DISPOSAL
Waste product should not be disposed of with household
waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling
advice.
Electrical products should not be discarded with
household products. Used electrical products
must be collected separately and disposed of at
collection points provided for this purpose. Talk
with your local authorities or dealer for advice
on recycling.
WWW.SENIXTOOLS.COM
Publicidad
