Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
There is steam
This is normal.
or smoke coming
from under the
control panel.
A burning or oily
This is normal for a new
odor coming from
oven and will disappear
the vent.
within
1
/
bake cycle.
Strong odor.
This is temporary.
The oven racks are
This is normal.
difficult to slide.
Fan noise.
This is normal.
NX60T8115SS_AP_DG68-01323A-01_MES+EN.indb 41
NX60T8115SS_AP_DG68-01323A-01_MES+EN.indb 41
Cause
Action
The oven vent is located there.
More steam is visible when
you are using the convection
functions or when baking or
roasting multiple items at the
same time.
To speed the process, set
a self-cleaning cycle for a
hour of the first
minimum of 3 hours. (See page
2
34.)
The insulation around the
inside of the oven emits an
odor the first few times the
oven is used.
Apply a small amount of
vegetable oil to a paper towel,
and then wipe the edges of
the oven racks with the paper
towel. Racks become dull and
hard to slide if they are left in
the oven during a self-clean
cycle.
The convection fan runs until
the function is over or the
door is opened.
Others
Problem
Cause
The product is not
The appliance has been
level.
installed improperly.
The leveling leg(s) is (are)
damaged or uneven.
The kitchen cabinets are
not properly aligned and
make the range appear to
be not level.
The display goes
The electrical outlet
blank.
Ground Fault Interrupter
(GFI or GFCI) has been
tripped and needs to be
reset.
Your digital control has
been damaged.
Action
Make sure the floor is level,
strong, and stable. If the floor
sags or slopes, contact a
carpenter.
Check and level the range. (See
the Installation Instructions.)
Ensure that cabinets are
square and provide sufficient
room for installation.
Replace the fuse or reset the
circuit breaker.
English 41
2021-02-19 오후 6:38:39
2021-02-19 오후 6:38:39
Publicidad
