Descargar Imprimir esta página

Medion LIFE P61202 Manual De Instrucciones página 159

Barra de sonido para tv con funcion bluetooth

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
To connect a Bluetooth-enabled audio output device:
 Switch the soundbar on, either by pressing the
control.
 Then press the SOURCE button on the soundbar or the BT button on the remote
control until the operating display (in this case VOL +) slowly flashes blue.
 If the device is not already in search mode, press and hold down the PAIR button
on the remote control for approximately three seconds.
 This switches the device to search mode.
 Now switch on the Bluetooth function on your audio output device and enable
search mode to pair the two devices with each other.
You will find more information about the Bluetooth function on your au-
dio output device in its user manual.
The soundbar's device name is displayed as soon as it finds a signal.
If you are prompted to enter a password, enter 0000.
When you hear "PAIRED" and the operating display lights up blue, this means the
two devices are synchronised with each other.
If the connection is interrupted, you will hear "DISCONNECTED".
10.1. NFC-enabled smart device
The NFC (Near Field Communication) function enables Bluetooth connections to be
established quickly and easily.
 Switch the soundbar on, either by pressing the
control.
 Then press the Source button on the soundbar or the BT button on the remote
control until the operating display slowly flashes blue.
 Switch on the NFC function on your smart device.
This switches the device to search mode.
 Hold your NFC-enabled smartphone close to the soundbar, over the marked
area.
 Confirm the prompt Verbinden mit your smart device with Ja. Wait for five to
eight seconds before moving your smart device away from the loudspeaker.
When you hear "PAIRED" and the operating display lights up blue, this means the
two devices are synchronised with each other.
 Select a medium volume and start playing the sound over your smart device.
 To disconnect the connection, hold your smart device over the marked area
again until you hear "DISCONNECTED".
160
button, or with the remote
button, or with the remote

Publicidad

loading

Este manual también es adecuado para:

Md 44102