Table Of Contents - Nilfisk-Advance SD 400 Instrucciones De Utilizacion

SD 400 / SD 430 / SD 500 / SDP 430
Manufacturer: Nilfisk-Advance A/S
Sognevej 25
2605 Brøndby, Denmark
www.nilfisk.advance.com
All rights reserved
The operating instructions for the single disc machine
are only intended for the operating personnel!
Introduction
Safety and reliability are prerequisites for achieving
unlimited pleasure from the single disc machine over a
long period of time. In order to achieve these
prerequisites, knowledge regarding the handling of the
machine, and its maintenance and care, is required. For
this reason, it is vital that the operator be instructed and
familiarised by a specialist
consultant prior to first using the single disc machine.
The operating instructions that lie before you are an
additional help for using and maintaining your single
disc machine in a proper way.
In case you encounter any technical problem please
address yourself to the nearest service organisation.
Nilfisk-Advance A/S
2 Table of contents ...................... 11
2 _1 Safety instructions............................... 12
2 _1.1 Significance of the operating instructions ..... 12
2 _1.2 Obligations on the part of the operator ......... 12
2 _1.3 Usage in accordance with the regulations .... 12
2 _1.4 Who is permitted to operate the machine?... 12
2 _1.5 Safety instructions in the operating manual.. 12
2 _1.6 In order to ensure the safety of the operator 12
2 _1.7 Conversions and changes to the machine.... 13
2 _1.8 General safety instructions ........................... 13
2 _1.9 Specific safety hints ...................................... 13
2 _1.10 Safety instructions for mains-operated
machines ...................................................... 13
2 _1.11 Information signs and stickers ...................... 13
2 _1.12 Product liability.............................................. 13
2 _1.13 Sources of danger ........................................ 13
2 _2 Technical data ...................................... 14
2 _3 Structure and accessories .................. 14
2 _3.1 General view................................................. 14
2 _3.2 Installation of the brush / pad holder / pad
replacement .................................................. 14
2 _3.3 Operation of the head of the shaft ................ 15
2 _3.4 Special instructions....................................... 15
2 _4 Operation .............................................. 15
2 _4.1 Initial operation ............................................. 15
2 _4.2 Usage - working with the machine................ 16
2 _4.3 Processing instructions................................. 16
2 _4.4 Shutting the machine off ............................... 16
2 _4.5 Possible applications and accessories ......... 17
2 _5 Maintenance / care............................... 18
2 _5.1 Precautionary measures prior to cleaning and
maintaining the machine............................... 18
2 _5.2 Trouble shooting and fault eradication.......... 18
2 _5.3 Cleaning the machine ................................... 18
2 _5.4 Pad care ....................................................... 18
2 _5.5 Daily examination ......................................... 18
2 _5.6 Annual maintenance ..................................... 18

2 Table of contents

11