Description of the device
13
4
12
11
10
7
9
8
Carrying handle
1
Control panel
2
Device housing
3
Cable storage
4
Fan grille at air exit grid
5
Air exit
6
Folding leg
7
Rubber foot
8
Type plate
9
Chassis (AB 45 Classic only)
10
Air inlet
11
Mains cable
12
Transport handle (AB 45 Classic only)
13
Operation
DANGER
Turbulence of gasses and dusts
Risk of fire and explosion
Do not operate the device near combustible gasses and
explosive dusts.
DANGER
Poisoning by exhaust gas
Sucked-in exhaust gas contaminates the environment.
Do not operate the device near open flames.
Prevent exhaust emissions near the air inlet.
WARNING
Injuries due to strong suction
The device creates strong suction at the air inlet, mean-
ing that objects, items of clothing or hair could be
sucked in.
Keep a safe distance from the air inlet.
1
2
3
4
6
5
English
WARNING
Injuries due to strong air streaming
The device creates strong air streaming at the air exit,
meaning that sucked-in objects could be ejected at high
speed.
Keep a safe distance from the air exit.
Note
Take suitable measures to avoid the device moving
around on smooth floors.
Note
When setting up the device, ensure that the fan grilles
are not blocked.
1. Open doors and windows as wide as possible to im-
prove ventilation.
Set up and align device
AB 30 Classic only:
AB 45 Classic only:
1. Set up and align device stably on level ground.
2. Fold out the folding leg if needed.
Control panel
Timer clock (AB 45 Classic only)
1
Power switch
2
Timer clock
1...180
Minutes
Power switch
OFF
Off
3
Maximum power
2
Medium power
1
Minimum power
Switching on the device
1. Connect the mains plug.
2. Switch on the device.
1
2
3