Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2.- VIDEO: modify the input-to-output mapping (a), edit the preset name (b), load a pre-configured preset
(c), create presets (d), and reset preset mappings (e).
3.- Changing the inputs-to-outputs mapping has an immediate effect on the matrix. Click on each drop-
down in the INPUT column to select the desired input to display for each output, if this configuration is
going to be a recurring configuration it would be advisable to save it in a preset. To do this, once the
mapping is made, click on the SAVE button of the desired preset and modify the name of the preset by
clicking on it. When you have another configuration and want to load the values of this preset press the
SET button. Finally, if you want to clear the preset setting press the CLEAR button.
d e
4.- INPUT: allows you to visualise inputs status (a), give them a name (b), and configure the EDID function
for each input (c). In addition, it is possible to load from a .bin file a custom configuration in the USER 1
and USER 2 presets (d) and to save an EDID configuration in a .bin file (e).
To configure the USER 1 or USER 2 presets press the BROWSE button to select the .bin file on your
PC. Select from the SELECT DESTINATION drop-down the preset to be configured (USER DEFINE1
or USER DEFINE2) and finally press the UPLOAD button to load the new preset configuration into the
matrix.
a
d e
b
c
a
b
c
a
b
a
a
b
c
a
b
c
d e
- 6 -
a
b
c
d
e
a
b
c
d e
c
b
d
e
d
a
b
e
f
g
a
Publicidad
