Dacor DOP30 940 Serie Manual Del Usuario página 22

Using the oven
Before using the racks
Each rack has stops that need to be placed correctly on the supports. These stops will keep
the rack from coming completely out.
Removing the racks
1. Pull the rack straight out until it stops.
2. Lift the front of the rack, and then pull it out.
Replacing the racks
1. Place the end of the rack on the support.
2. Tilt the front end up and push the rack in.
42 English
DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 42-43 DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 42-43
CAUTION
• Do not cover a rack with aluminum
foil or place aluminum foil on the
oven bottom. This will hamper heat
circulation, resulting in poor baking, and
may damage the oven bottom.
• Arrange the oven racks only when the
oven is cool.
Using the gliding rack
The fully extendable gliding rack makes food preparation easier, especially when you are
preparing heavier dishes. The gliding rack has 2 glide tracks that allow you to extend the
rack well out of the oven without touching the sides of the oven walls.
Installing the gliding rack
Rack Guides Rack Guides
Locking position Locking position
• With the gliding rack in the closed
position and the oven off, carefully
insert the gliding rack between the
guides until the rack reaches the back.
See picture on the bottom left for
closed position.
• Always grasp the gliding rack by its
handle at the center-front of the rack.
Pulling by the rack frame can cause the
rack to come loose, resulting in spills
and possible personal injury.
NOTE
Be sure to lock the gliding rack onto the
rack support. Otherwise, the rack may
come loose and cause personal injury.
English
2023-01-17 오후 3:01:55 2023-01-17 오후 3:01:55
43