VebaBox TUC2000 Manual Del Usuario página 10

submitted to fluctuating ambient temperatures in the range of -20;
+40°C for TUC1800 or -20;+50°C for TUC2000.
CAUTION: The VebaBox is not constructed for cooling goods down. This
means, that goods should be preconditioned to the required temperature
before being put into the box.
CAUTION: When loading the box, allow clearance around air intake and
outlet of the unit. Goods should be stacked to allow at least a 10 cm gap directly
below the ceiling of the box. Do not place goods directly under the heat
exchanger – risk of dripping water.
The VebaBox TUC180 / TUC2000 is intended to be installed in the
closed superstructures of any type of cargo vans equipped with an
alternator power source of 12V / 100A DC minimum. The unit is
available both for installation on one side panel of the box (TUC180B
/ TUC200B) or installation on top of the box (TUC180T / TUC200T).
4. Product assembly specifications
The product assembly consists of
a) Basic parts
1. VebaBox body
2. Thermal unit TUC1800 / TUC2000– monoblock
3. Power supply cable set
4. Mechanical fixing set
b) Accessories (optional)
1. Remote controller
2. LED lighting inside the VebaBox
3. Power packs
TUC1800/2000-usm. rev.01
© 2020 VebaBox B.V. User Manual VebaBox+TUC1800 or TUC2000
10