Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the device underside with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Base Dimensions (LxWxH):
Weight:
Maximum ambient temperature t
Maximum housing temperature t
Fuse:
Accessories:
Spare cone 2m white
Spare cone 2m red
Spare cone 2m blue
Spare cone 3m white
Spare cone 3m red
Spare cone 3m blue
Spare cylinder 2m white
Spare cylinder 2m red
Spare cylinder 2m blue
Spare cylinder 3m white
Spare cylinder 3m red
Spare cylinder 3m blue
Please note: Every information is subject to change without prior notice. 03.02.2005 ©
230 V AC, 50 Hz ~
150 W
480 x 480 x 230 mm
11kg
:
45° C
a
60° C
(steady state):
B
F 1 A, 250 V
No.
51116150
51116151
51116152
51116160
51116161
51116162
51116170
51116171
51116172
51116180
51116181
51116182
22/41
51116120_V_1_1.DOC
Publicidad
