Bartscher 10250M Manual De Instrucciones página 42

6. Cleaning
WARNING!
Disconnect the device from the power supply (pull the
plug from the socket!) before cleaning.
The device is not designed for direct washing via water jets!
Make sure no water gets into the device.
Important tips
o Clean the device regularly. If the device is not kept clean, this may affect the
durability of the device and has a negative impact on its operation and lead to
accumulation of fungi and bacteria.
o Immediately remove any remnants of food and beverages from the walls of the
internal chamber of the device with a moist cloth. If you wait too long, the cleaning
may become difficult and in extreme cases not possible at all. Excessive
contamination may lead to damaging of the device.
o Do not use hard and sharp objects to remove dry dirt.
o Avoid using sprays and other aggressive cleaning agents (e.g. oven cleaners), as
such chemicals may leave stains or even damage the surface of the device.
Cleaning
o Wipe the interior walls and bottom of the cooking chamber with warm water
and soft cloth.
o Clean the exterior surface with a moist cloth. To protect the parts located inside the
device from damage do not allow water to seep through the ventilation holes into the
interior of the device.
o Clean the door, door seals and other adjacent elements with a most cloth to remove
the entire dirt. Do not use any aggressive cleaning agents.
o Do not get the control panel overly wet. Clean it with a soft, moist cloth. Do not close
the door while cleaning the control panel to avoid accidental switching the device on.
o If condensation forms on the inside or outside of the door, remove it with a soft cloth.
The condensation forms when the microwave oven is operated in high humidity
environment. This is a normal occurrence.
- 38 -