gsc evolution 201400008 Manual Del Usuario página 11

Problem
It does not work
Low light or flashing
It does not change color or
sequence.
In RGB lights, for
Ref,: 000705133.
Each projector emits different
chimes
In RGB lights, for
Ref,: 000705133.
Cause
It is not connected to a 12V AC
electrical connection.
An electric transformer is being used.
Possible excessive voltage drop
through the cable.
Thermal protection against over
temperatures has been activated.
The command is not linked to the
controller.
The projectors are not synchronized.
Solution
Connect it to a 12V AC safety
transformer.
Replace the transformer for a
conventional safety pool.
In multi-voltage transformers,
select an appropriate voltage
output or compensate the voltage
drop with a larger cable.
Check that the cooling holes of the
projector are clear of obstacles.
Check that it is properly con-
nected.
Perform a long press, from 1 to 3
seconds and they will be placed
in white.
www.garsaco.com | 11
EN