Cooper Lighting Solutions Halo SBL10A50GY Instrucciones Para La Instalación página 3

ENGLISH
INSTALLATION
1. When selecting the mounting location for this light fixture the most important thing to remember for the operation to work properly is that
it works from the power received from direct sunlight. The solar panel works best when placed on the southern-facing portion, or the
highest point, of a structure. The more direct sunlight the solar panel receives in a day, the longer the light will operate. Make sure there is a
minimum amount of obstructions between the solar panel and the sun.
2. Mount at a maximum of 15ft high for best results.
1
63.00mm
(2.480")
WALL MOUNT
1. Drill 3 holes on the chosen mounting surface using the fixture arm as the template or the scale diagram. Fig (1)
2. Use the 3 included mounting lag screw (AA) with 3 washers (BB) to secure the fixture into pre-drilled pilot holes. Ensure fixture is securely
fixed to the wall. Fig (2)
3
POLE (TENON) MOUNT
1. Remove the pole mounting screw from the bottom of the fixture arm as pictured in Fig (3)
2. Slide the fixture onto the tenon pole (sold separately). Fig (4)
3. Using the screw you removed in an early step, re-attach in the same hole and tighten until the fixture is secured to the pole.
Solar LED Dusk to Dawn & Motion Activated Area Light Instructions
2
75.52mm
(2.973")
4
www.cooperlighting.com
IL51862623
3