Getting Started - Zavor LUX Manual Del Usuario

Olla eléctrica multifuncional
Ocultar thumbs Ver también para LUX:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

programs available with a touch of a finger. Available for selection are: two
pressure cooking settings, two slow cooking settings, white rice, brown rice,
risotto, brown, sauté, simmer, steam/rice, yogurt, keep warm, time delay,
start/stop and a plus and minus button to adjust cooking time and time delay.
Also, on the control panel you will find the HIGH and LOW indicator lights
which will blink while pressure or temperature is building. These three lights
will go solid once the unit has reached proper pressure or temperature.

Getting Started:

Read the safety instructions found in this manual before plugging in and operating
the unit. Before using the Multi-cooker for the first time, follow these steps:
1. Remove all packing materials and literature from within the ZAVOR LUX™
Multi-Cooker. Lift out the removable cooking pot and remove any pieces of
paper from under it. Remove the plastic protection from the control panel and
any stickers from the lid or stainless steel housing.
2. Wash all removable parts in warm soapy water. Rinse and dry all parts
thoroughly. Wipe the stainless steel outer housing with a clean damp cloth.
NEVER submerge the stainless steel outer housing in water or any other
liquid. Only the removable cooking pot is dishwasher safe.
3. To clean the pressure regulator knob, gently push the pressure regulator knob
down and at the same time turn the pressure regulator knob counterclockwise
past STEAM to CLEAN setting. Once the white dot on CLEAN is aligned with
the white dot on the base of the pressure regulator, you can lift the pressure
regulator up and off the lid. Look through the holes of the pressure regulator to
make sure there is nothing obstructing, and then clean the pressure regulator
knob with warm soapy water, allowing the water to run through the pressure
regulator to remove all particles.
4. To put the pressure regulator back onto the lid, simply align the CLEAN setting
with the white dot on the base, gently push down on the pressure regulator
and turn the knob clockwise until it slides back into place.
5. Make sure the silicone gasket is seated properly inside the lid or else the
cooker will not function properly.
6. After thorough drying, place the removable cooking pot back into the Multi-
cooker before cooking.
Before First Use
7

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido