DAB e.sybox Serie Instrucciones página 10

GB
ENGLISH
The Manufacturer does not vouch for correct operation of the electro-
pumps or answer for any damage that they may cause if they have been
range or in contrast with other indications given in this manual.
The Manufacturer declines all responsibility for possible errors in this instruc-
tions manual, if due to misprints or errors in copying. The Manufacturer re-
necessary or useful, without affecting their essential characteristics
1. TECHNICAL CHARACTERISTICS
Voltage
Frequency
ELECTRIC POWER
SUPPLY
Maximum current
Maximum power
Overall dimensions
Empty weight (excluding
CONSTRUCTION
CHARACTERI-
STICS
Protection class
Motor insulation class
Maximum head
HYDRAULIC
PERFORMANCE
Priming
Maximum working pressure
Liquid temperature max
WORKING
Environment temperature max
CONDITIONS
Storage environment
temperature
10
2. INSTALLATION
e.sybox
6,8 A
565x265x352 mm without feet
22,5 kg
F
65 m
<5min at 8m <5min a 7m
3. COMMISSIONING
8 bar
3.1 Electrical Connections
To improve immunity to the possible noise radiated towards other appliances it is rec-
ommended to use a separate electrical duct to supply the product.
or directly exposed to atmospheric agents.
The system is designed to be able to work in environments where the tem-
The system is suitable for treating drinking water.
products.
The system can take in water the level of which must not be at a depth greater
Do not connect any pipe to the 1¼'' mouth that houses the non-return valve,
If the system is used for the domestic water supply, respect the local regula-
tions of the authorities responsible for the management of water resources.
• The voltage and frequency on the pump's technical data plate correspond
to the values of the power supply system.
• The electrical connection is made in a dry place, far from any possible
•
Maximum working pressure 8 bar.
-