Makita BU01 Manual De Instrucciones página 8

Installing or removing the long
nozzle
Optional accessory for BU01 / BU02
Install the long nozzle in the same way as the nozzle. To
remove the long nozzle, perform the installation proce-
dure in reverse.
Installing or removing the tapered
nozzle
Optional accessory for BU01 / BU02
Attach the tapered nozzle to the nozzle, and then install
the nozzle to the main unit. To remove the tapered noz-
zle, perform the installation procedure in reverse.
Assembly for vacuuming
Installing or removing the nozzle
Optional accessory for BU02
Align the protrusions on the nozzle with the grooves on
the main unit, then insert the nozzle into the main unit,
and then turn it to lock it into place.
► 1. Nozzle
To remove the nozzle, perform the installation proce-
dure in reverse.
Installing or removing the dust bag
Optional accessory for BU01 / BU02
Align the protrusions on the joint of dust bag with the
grooves on the main unit, then insert the joint into the
main unit, and then turn it to lock it into place.
► 1. Joint 2. Dust bag
1
To remove the dust bag, perform the installation proce-
dure in reverse.
Installing or removing the flexible
hose set
Optional accessory for BU01 / BU02
Attach the joint, flexible hose, pipe, and sash nozzle to
the main unit in order.
► 1. Joint 2. Flexible hose 3. Pipe 4. Sash nozzle
To remove the flexible hose set, perform the installation
procedure in reverse.
8 ENGLISH
1
2
1
2
3
4