TRAPP ES-500 Manual De Instrucciones página 42

Image merely
illustrative
Figure 18
Changing the engine oil
Determine the expected temperature range before
the next oil change. All oils must match the
API SG-SL service category.
1. Your equipment must be on a leveled, flat surface.
2. It will be easier to drain the oil if hot.
3. Collect the used oil in a proper container.
4. Carefully unscrew the oil drain plug (1) in order to
avoid any potential accidents, such as burns.
42
D
Image merely illustrative
5. When the oil is completely drained, screw the oil
drain plug into place.
6. Remove the crankcase oil entry cap (2) and insert
20W50 oil, according to engine model.
Note: For oil quantity information, check the engine manual.
www.trapp.com.br
3
Oil drain plug
Oil inlet cap
1
Image merely illustrative