Keysight EDU33210 Serie Manual De Instrucciones página 102

SCPI Command
[SOURce[1|2]:]FREQuency {<frequency>|MINimum|MAXimum|DEFault}
The APPLy command configures a waveform with one command.
Modulating Waveform Shape
On a two-channel instrument you can modulate one channel with the other.
You cannot modulate noise with noise, PRBS with PRBS, or an arbitrary waveform with an arbitrary waveform.
The modulating waveform shape (internal source) may be:
– Sine wave
– Square with 50% duty cycle
– Triangle with 50% symmetry
– UpRamp with 100% symmetry
– DnRamp with 0% symmetry
– Noise: White Gaussian noise
– PRBS: Pseudo Random Bit Sequence (polynomial PN7)
– Arb: Arbitrary waveform
Front Panel Operations
Press [Modulate] > Type AM.
or
102 Keysight EDU33210 Series User's Guide