Keysight EDU33210 Serie Manual De Instrucciones página 104

SCPI Command
[SOURce[1|2]:]AM:INTernal:FREQuency {<frequency>|MINimum|MAXimum|DEFault}
[SOURce[1|2]:]FM:INTernal:FREQuency {<frequency>|MINimum|MAXimum|DEFault}
Modulation Depth (AM)
The modulation depth is a percentage that represents the amplitude variation. At 0% depth, the amplitude is one
half of the carrier's amplitude setting. At 100% depth, the amplitude varies according to the modulating waveform,
from 0% to 100% of the carrier's amplitude.
– Modulation depth: 0% to 120%. The default is 100%.
– Even at greater than 100% depth, the instrument will not exceed ±5 Vpeak on the output (into a 50 Ω load). To
achieve modulation depth greater than 100%, output carrier amplitude may be reduced.
Front Panel Operations
Press [Modulate] > Type AM > AM Depth. Use the numeric keypad or the knob and arrows to set a desired value. If
you use the keypad, press Percent to finish.
104 Keysight EDU33210 Series User's Guide