Publicidad
Idiomas disponibles
Idiomas disponibles
To specify the slope of the trigger signal edge: Press [Trigger] > Trig Out Setup > Trig Out
SCPI Command
TRIGger[1|2]:SOURce {IMMediate|EXTernal|TIMer|BUS}
TRIGger[1|2]:SLOPe {POSitive|NEGative}
See
Triggering
for more information.
Trigger Out Signal
See
Trigger Output Signal
130
for more details.
Off
| (Up) | (Down).
Keysight EDU33210 Series User's Guide
Publicidad
