SCPI Command
OUTPut:SYNC {ON|1|OFF|0}
OUTPut[1|2]:SYNC:MODE {NORMal|CARRier|MARKer}
OUTPut[1|2]:SYNC:POLarity {NORMal|INVerted}
OUTPut:SYNC:SOURce {CH1|CH2}
Pulse Waveforms
As shown below, a pulse or square wave consists of a period, a pulse width, a rising edge, and a falling edge.
Period
– Period: reciprocal of maximum frequency to 1,000,000 s. The default is 1 ms.
– The instrument adjusts the pulse width and edge time as needed to accommodate the specified period.
Keysight EDU33210 Series User's Guide
95