Fritz! Powerline 1260 Guia De Inicio Rapido página 22

Expanding the Powerline Network
1. Insert FRITZ!Powerline 1260 in an outlet in the vicinity of a pow-
erline device that is part of the powerline network already set up.
2. Wait until the "WLAN" LED on FRITZ!Powerline 1260 lights
steadily and then press and hold the "Connect" button down for
1 second.
3. Within 2 minutes, press and hold the button for powerline pairing
(usually labeled "Pairing" or "Security") on another adapter in the
powerline network for 1 second.
4. If you have a FRITZ!Box with FRITZ!OS 6.90 or higher installed,
you can integrate FRITZ!Powerline 1260 into the Mesh of your
FRITZ!Box: First trigger registration mode with the "WPS" or
"Connect" button on the FRITZ!Box, and then press the "Connect"
button on FRITZ!Powerline 1260 and hold it down for 1 second.
The LEDs on FRITZ!Powerline 1260 will start flashing.
5. As soon as the "Connect" LED stops flashing, you can insert
FRITZ!Powerline 1260 into an outlet at the location where you
need access to the internet and the home network for your
smartphone, tablet and other network devices.
22
1
2
LAN
4