Publicidad
Idiomas disponibles
Idiomas disponibles
6.
In this step the application will show you the name of the Wi-
Fi network to which your phone is connected and to which the
camera will connect. Enter the Wi-Fi network password and
press Next.
7.
Now a QR code will appear on the screen of your phone. Show
the QR code to the camera by putting your phone a few cm
from the lens and moving it up to a distance of 15 – 20 cm.
When the camera has recognized the QR, it will emit a triple
' d ing'. Then click on "heard sound confirmation".
8.
The installation will finish automatically, and the installed
camera will be displayed. Click on "finish" and enjoy your new
Energeeks camera.
Connection failure: If after reading the QR code, the installation
process fails, make sure that the Wi-Fi network is 2.4Ghz and that the
password is correct.
Important: The smart features of today's routers may cause the
device not to connect even when you have selected your 2.4Ghz ne-
twork.This is due to automatic frequency management or automatic
channel change configurations that these routers have incorporated,
causing the device to not be installed or to go offline from time to
time for no apparent reason.If this happens, please contact our te-
chnical support.
Note: The LED indicator will turn off once the camera is
connected and online. If the led indicator flashes slowly, it indicates
that there is no internet connection and it will try to connect again
without restarting or reinstalling.
20
Publicidad
