Xiaomi Smart Cooking Robot Manual De Usuario página 18

Troubleshooting
Problems
Liquid has entered the
area under the pot.
The product does not start, and
the screen does not turn on.
The pot cannot be installed
onto the cooking base.
The product stops working
during use.
Measured weight is incorrect.
Basic cooking operations are
interrupted.
The cooking robot cannot
connect to Wi-Fi.
The system version cannot be
updated.
The heating function does
not work.
Fault Diagnosis & Solutions
Immediately unplug the power cord.
Turn o the cooking robot.
Use a rag to wipe o excess liquid from the area under the pot.
Check if the blender blade is properly installed and if the rubber seal is damaged.
Do not move or tilt the cooking base, so as to prevent liquid from entering the cooking base
and contacting live components.
Do not aempt to disassemble the cooking base, as it does not contain any parts that can
be repaired on your own.
If you are not sure whether liquid has owed into the cooking base or not, do not turn on the
product, but contact customer service.
Check whether the power cord is correctly plugged into the socket.
Check whether the product is turned on.
Check whether the pot and the blender assembly are installed correctly.
Remove the pot from the cooking base.
Remove some ingredients or add some liquid.
Wait for ve minutes (cool-down time).
Reinstall the pot.
Check whether the ventilation port on the back of the cooking base is unobstructed.
Press the control knob to restart the product.
If the system error message persists aer the cool-down time is over, please contact
customer service.
Check whether there are any objects touching the sides of the cooking base.
Check whether the cooking base is being pulled by the power cord, which could cause the
weighing module to be unbalanced.
Check whether the product is placed on a clean, stable, and at counter.
Do not touch the product at any time during the weighing process.
Added ingredients do not meet requirements.
Remove the pot from the cooking base and empty it.
Reinstall the empty pot onto the cooking base.
Restart the cooking process.
Try to connect again aer reseing the Wi-Fi in the seings screen.
Check whether Wi-Fi signal is strong enough.
Check whether the product is currently cooking.
Check whether the Wi-Fi network works properly.
The heating time may not be set correctly. Check that the heating time has been set.
The temperature has not been selected. Check that the temperature has been set.
The pot temperature has already exceeded the set temperature.
16