Singer X5004-HD Manual De Instrucciones página 25

13. HOW TO ADJUST THE STITCH
LENGTH
The stitch length dial should be set on the 3 mm
(1/8 inch) setting for most sewing conditions.
Adjust the stitch length to 4mm (5/32 inch) when
sewing heavy weight fabrics.
Adjust the stitch length to 2mm (5/64 inch) when
sewing light weight fabrics to obtain excellent seams
without puckering.
14. HOW TO ADJUST THE SEAM
WIDTH
Overedge seam width can be achieved by
repositioning the needle position and also with the
width adjustment knob.
Width Adjustment by Changing Needle Position
Overedge seam width can be adjusted by changing
the needle position.
a) When only left needle is used ............ 5.7 mm
b) When only right needle is used............ 3.5 mm
Width Adjustment with Adjustment Knob
Use of width adjustment knob will permit further
adjustment within the width range shown below.
a) when only left needle is used......5.2 ~ 6.7 mm
b) When only right needle is used... 3.0 ~ 4.5 mm
(7/32 inch)
(9/64 inch)
(13/64 ~ 17/64 inch)
(1/8 ~ 11/64 inch)
5.7 mm 5.7 mm
(7/32 ) (7/32")
Left/Right Left needle
needle
Left/Right Left needle
needle
3.5 mm
(9/64")
Right needle
Right needle
21