AEG LB 4713 BT Instrucciones De Servicio página 48

English
48
By cable
1. Connect the 3.5 mm stereo RCA cable to an external audio source. If required, use a
suitable adapter (not included).
2. Insert the other end of the cable into the AUX jack (6) on the unit.
3. Switch the speaker on by setting the ON/OFF switch (4) to "ON".
4. Adjust the volume on the audio source. The function buttons on the speaker are not
operational.
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connection of devices over a short dis-
tance. Devices with Bluetooth standard are transmitting between 2,402 and 2,480 GHz in
the ISM band (Industrial, Scientific and Medical). Interferences can however be caused by
WLANs, networks, wireless telephones, or microwave ovens, for example, which operate in
the same frequency band.
This device offers you the possibility to use a Bluetooth-enabled device. The functional
radius is limited to approx. 15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and
has a music-player function, then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals
are wirelessly transferred between the playing device (source) and the receiving device. To
be able to operate the source by remote control, the player needs to support the AVRCP
profile (Audio Video Remote Control Profile).
Due to the different device manufacturers, models, and software versions, a full functional-
ity cannot be guaranteed.
• Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the devices.
1. Ensure, that the Bluetooth function is activated in your player (e.g. mobile phone).
For this, refer to the operation manual of your player.
2. Turn the device on by moving the ON/OFF switch (4) to the ON position. The
indicator lamp flashes rapidly. The device is now set to the pairing mode.
3. Chose the Bluetooth menu in your player and register the device in your player.
For this, refer to the operation manual of your player. The device "AEG LB 4713"
will show in your player as a selection.
4. Now enter the password "0000" in your player, depending on the device manufac-
turers, model, and software version.