SAFETY INFORMATIONS
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
•
Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on pulley, camshaft or crankshaft. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
USE (1/2)
Inlet Camshaft Adjusting Tool (1),
to be used as OEM 11 9 971
Exhaust Camshaft Adjusting Tool (2),
to be used as OEM 11 9 972
Screws (6),
for connecting the camshaft timing tools
1 with 1a and 2 with 2a
Screws (7+8),
to connect the camshaft timing tools
(1+1a+2+2b) to the cylinder head
VANOS Adjusting Tool (3),
to be used as OEM 11 5 370
Chain Tensioner Locking Tool (4),
to be used as OEM 11 5 290
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed