Intellinet Network Solutions 510530 Instrucciones página 3

Instructions
MODELS
• Fast Ethernet WDM Bi-Directional Single
Mode Media Converter (510547)
10/100Base-TX to 100Base-FX (SC) Single-Mode,
20 km (12.4 mi.), WDM (RX1550/TX1310)
• Fast Ethernet WDM Bi-Directional Single
Mode Media Converter (510530)
10/100Base-TX to 100Base-FX (SC) Single-Mode,
20 km (12.4 mi.), WDM (RX1310/TX1550)
• Gigabit Ethernet WDM Bi-Directional Single
Mode Media Converter (545068)
10/100/1000Base-TX to 1000Base-LX (SC) Single-
Mode, 20 km (12.4 mi.), WDM (RX1550/TX1310)
• Gigabit Ethernet WDM Bi-Directional Single
Mode Media Converter (545075)
10/100/1000Base-TX to 1000Base-LX (SC) Single-
Mode, 20 km (12.4 mi.), WDM (RX1310/TX1550)
Connections
Twisted Pair–RJ45
Connect the UTP port of the media converter to an
RJ45 port on the network; e.g., to an Ethernet switch.
Cat5e or better cabling is recommended.
Fiber Optic
As shown above, one fiber optic cable needs to be connected
between two WDM media converters. As a rule, these media
converters must be used in pairs. Model 510547 connects to
model 510530 (Fast Ethernet), and model 545068 connects
to 545075 (Gigabit Ethernet).
English 3