●
Do not insert objects through slots in the printer.
●
Take care not to spill liquid on the printer. After cleaning, make sure all
components are dry before using the printer again.
●
Do not use aerosol products that contain flammable gases inside or around
the printer. Do not operate the printer in an explosive atmosphere.
●
Do not block or cover the openings of the printer.
Mechanical hazard
The printer has moving parts that could cause injury.
To avoid personal injury, take the following precautions when working close to the
printer:
●
Keep your clothing and all parts of your body away from the printer's moving
parts.
●
Avoid wearing necklaces, bracelets, and other hanging objects.
●
If your hair is long, try to secure it so that it will not fall into the printer.
●
Take care that sleeves or gloves do not get caught in the printer's moving
parts.
●
Do not operate the printer with covers bypassed.
●
Do not try to dismantle the cutter assembly: refer servicing to qualified
service personnel.
●
Do not stand on the drawers: the printer could fall over.
Light radiation hazard
Light radiation is emitted from the beacon.
This beacon is in compliance with the requirements of the exempt group of IEC
62471:2006:
recommended not to look directly at the LEDs while they are on. Do not modify the
module.
Heavy paper hazard
Paper rolls could weigh up to 18 kg. Follow your local Environmental, Health, and
Safety regulations for handling heavy paper rolls.
Photobiological safety of lamps and lamp systems . However, you are
Heavy paper hazard
5