Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Service
WARNING
cause serious hazard.
Service Center or Authorized SKIL Service Station.
General Maintenance
WARNING
Periodically inspect the entire product for damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Securely tighten all fasteners and caps and do not operate this product
until all missing or damaged parts are replaced. Please contact customer service or an
authorized service center for assistance.
WARNING
Cleaning
WARNING
Ventilation openings and switch selectors must be kept clean and free of foreign matter. Do
not attempt to clean by inserting pointed objects through openings.
WARNING
ammonia and household detergents that contain ammonia.
Storage
Store the tool indoors in a place that is inaccessible to children. Keep away from corrosive
agents.
TROUBLESHOOTING
Problem
Battery pack will not
charge.
Preventive maintenance performed by unauthorized personnel may
result in misplacing of internal wires and components which could
We recommend that all tool service be performed by a SKIL Factory
When servicing, use only identical replacement parts. Use of any
other parts could create a hazard or cause product damage.
To avoid serious personal injury, always remove the battery pack
from the charger/tool when cleaning or performing any maintenance.
The tool may be cleaned most effectively with compressed dry air.
wear safety goggles when cleaning tools with compressed air.
Certain cleaning agents and solvents damage plastic parts.
these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents,
Cause
1. Charger is not plugged into
a functioning outlet.
2. Battery pack is not properly
inserted into the charger.
3. Bad contacts.
4. Battery is over- or under-
temperature.
5. Battery pack is damaged.
6. Charger is damaged.
Remedy
1. Confirm that the charger is plugged
into a functioning outlet.
2. Confirm that the battery pack is
inserted into the charger completely.
3. Clean the contacts of the charger or
battery packs.
4. Cool the battery if too hot. Place the
battery indoors if too cold.
5. Have the battery pack serviced by
an Authorized SKIL Service Station.
6. Have the charger serviced by an
Authorized SKIL Service Station.
Always
Some of
15
Publicidad
