Batteries & Power Pack - Upright 8000 Serie Manual Del Usuario

Battery Power, 24V DC.
Ensure batteries have been fully charged before use and that the Battery Isolating
Plug is securely connected.
Mains Power, (OPTIONAL)
Connect the mains supply, either 110V or 220/240V A.C., depending upon the
motor specification. Check the motor is running when the key is turned to the ON
position.
All extensions must be a minimum of 2.5mm², and no longer than
10m, due to possible voltage drop, which will damage the motor.
Petrol/diesel Power, (OPTIONAL)
Check the fuel and oil levels of the engine. Switch on the ignition using the key
switch on the slew mounted legend panel. Check the engine runs using the start
and stop buttons in the basket.
Batteries
Fig. 1
Power Pack
Fig. 2
TL49K
Oil Filler and Sight Glass
508159-000
BATTERIES & POWER PACK
Battery Charger
Pump Handle
Hand Pump
!
15