Publicidad
Idiomas disponibles
Idiomas disponibles
EN
FR
ES
DAB DRC
Initialize DAB
Troubleshooting
∫ DAB cannot be selected with the Input Selector of the connected device.
0 Make sure that this unit is properly connected to the device.
0 Try disconnecting and then connecting again.
0 Try restarting the connected device. If the issue is not fixed by restarting, try unplugging the power cord of the connected device,
and then plugging it in again.
∫ Preset information on the connected device has disappeared.
0 Be aware that when you disconnect this unit from the connected device, the preset information will be deleted.
IT
DE
NL
With the DRC (Dynamic Range Control) setting, you can reduce the dynamic range of DAB
digital radio so that you can still hear quiet parts even when listening at low volume levels -
ideal for listening to the radio late at night when you don't want to disturb anyone.
"Off (default value)" : DRC off
"Large" : Large reduction in dynamic range
"Small" : Small reduction in dynamic range
This initializes the unit. Initialize the unit when disposing of it, giving it to another person, or if
operation becomes unstable.
1. Press ENTER on the remote controller when "Start" is displayed.
2. With the cursors on the remote controller, select "Yes", and then press ENTER.
0 The scan information is deleted when you initialize the adapter.
0 When you have initialized the unit for the purpose of disposing of it or giving it to another
person, remove this unit from the connected device when initialization is complete. If DAB
is selected as the input again when this unit is inserted, the automatic scan for stations
starts.
0 When you have initialized the unit because operation was unstable, once initialization is
complete, remove the unit then insert it again.
– EN 3 –
SV
RU
AR
JP
繁中
Publicidad
