WolfPack MJHG021 Manual De Instrucciones página 16

4. MAINTENANCE
Always disconnect the apparatus before carrying out inspection or cleaning.
Never use water or other liquids to clean the electrical parts of the hot air gun.
• Never use easy inflammable liquids for cleaning the hot air gun, especially the mouthpiece.
• Regular maintenance of your hot air gun prevents unnecessary problems. Keep the ventila-
tion slots of the hot air gun clean to prevent overheating.
Troubleshooting
In case the hot air gun does not work well, some possible causes and their solutions are listed
below.
• The engine gets overheated.
• The ventilation slots of the hot air gun are dirty.
• Clean the ventilation slots.
• The hot air gun does not start when it is switched on.
• Interruption in the electrical circuit.
• Check the mains lead and the mains plug.
• The switch is defective.
• Pull the mains lead out of the wall socket, because there is a chance of fire risk! Have the
hot air gun repaired at your local dealer.
• The engine does not work, but it does heat.
• Interruption in the electrical circuit.
• Pull the mains lead out of the wall socket, because there is a chance of fire risk! Have the
hot air gun repaired at your local dealer.
ENVIRONMENT
To prevent damage during transport, the appliance is delivered in solid packaging which
consists largely of reusable material. Therefore, please make use of options for recycling the
packaging.
Faulty and/or discarded electrical or electronic apparatus must be collected at the
appropriate recycling locations.
16