- Hold the steamer only with the handle (4).
- The appliance is activated when the switch (1) is pressed and held. Vibrations and buzzing are
normal. Release the switch (1) to stop the operation.
- When steam is ready, first direct its stream for a few seconds away from the clothing to disperse
drops of water, if any.
- Then place the nozzle (2) at least 5 cm away from the cloth and move it slowly.
- The switch (1) must be pressed down all the time during the operation. If any drops of water are
present on the nozzle (2), remove them with a rag before steaming.
- Do not hold the cloth in the place of steaming without protection of the hand. To straighten the
cloth, pull it.
- If buzzing becomes stronger, and steam stops coming out, release the switch (1) and check the
level of water in the reservoir.
- Small wet places may appear on the cloth from steaming. the cloth may also be slightly wet after
steaming. Leave the cloth until it is dry before using it or storing.
NOTE.
Steam is hot. Danger of scalding or burning.
CLEANING AND MAINTENANCE
Before cleaning the appliance, remove the plug from the socket and wait for the appliance to cool
down completely.
- The appliance must not be immersed in water.
- It must not be cleaned with sharp, abrasive cloth or sponges, as it may be destroyed.
- Wipe the appliance with a moist cloth, and then wipe it dry with a clean cloth.
- Slide out the reservoir and pour out water from it.
- Store vertically.
ENVIRONMENTAL PROTECTION
- The appliance is made of materials which can be recycled.
- It should be handed over to the applicable collection point for the recycling of electrical and
electronic equipment.
WARRANTY
- This appliance is designed for domestic use only.
- It cannot be used for professional purposes or for other than the intended use.
- Improper use will nullify the guarantee.
•
10
EN