2
Setup
1.
Make sure you use the correct SIM card.
mini-SIM (2FF)
2.
Open the micro-SIM card cover.
3.
Insert the micro-SIM card gently into the card tray in the direction shown in the figure below
until it clicks. Then close the micro-SIM card cover.
Note:
To remove the micro-SIM card, gently press the micro-SIM card in until it clicks. The
card will automatically pop out.
Do not insert or remove a micro-SIM card when the router is running, as this may
affect performance or damage the micro-SIM card.
nano-SIM (4FF)
micro-SIM (3FF)
SIM Ca rd
2