Publicidad
Idiomas disponibles
Idiomas disponibles
Add water to the height of
the word "level" in the basin
as the picture shows, and the
water will come out from the
designed holes if the water
exceeds the level.
Put the pole upright, press the
power button for 3 seconds,
the wheels will start to rotate,
enter the cleaning mode for
about 3.5 minutes, and then
step on the foot switch once,
the water in the cleaning basin
will flow into the wastewater
tank and then the product
enters the drying mode. After
about 3-5 minutes, you can
short press the power button
to stop, then the two pieces
of round cleaning cloth is
cleaned, and the triangular
cloth in the middle can be re-
moved and cleaned if needed.
Foot
Switch
7
Publicidad
