Operation Capabilities; Conventions; Unpacking/Delivery; Safety - Advance SW4000 Instrucciones De Uso

OPERATION CAPABILITIES

This sweeper has been approved to clean (sweeping and vacuuming) compact and solid loors, in civil and industrial environments,
under safe operation conditions by a qualiied operator.

CONVENTIONS

Forward, backward, front, rear, left or right are intended with reference to the operator's position, that is to say on the driver's seat
(3).

UNPACKING/DELIVERY

CAUTION!
To unpack the machine, carefully follow the instructions on the packing.
Upon delivery carefully check that the machine and its packing have not been damaged during transportation. In case of visible
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to ill in a damage claim.
Check that the machine is equipped with the following features:
– Technical documents:
•
Sweeper Instructions for Use Manual (the present document)
•
Sweeper Spare Parts List
– No. 1 150 A main fuse (F0)
– No. 1 10 A fuse

SAFETY

The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working
or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is
the best guarantee against accidents and is essential for successful completion of any prevention program.

VISIBLE SYMBOLS ON THE MACHINE

WARNING!
Carefully read all the instructions before performing any operation on the machine.
WARNING!
Do not wash the machine with direct or pressurised water jets.
WARNING!
X %
Do not use the machine on slopes with a gradient exceeding the speciications.
WARNING!
Moving parts.
WARNING!
Moving parts. Danger of crushing.
WARNING!
Parts under voltage. Presence of corrosive luids.
INSTRUCTIONS FOR USE
1464818000 - SW4000
ENGLISH
3