Descargar Imprimir esta página

Brigmton BBOARD-102BT-N-A-R Manual De Instrucciones página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Press the power button.
2. Place the scooter on a flat surface and observe the safety measures
described at the beginning of protection, weight, etc.
3. Raise one foot to one of the parts (with which you feel most
comfortable) and the system goes into self-balancing, raise the other foot
and try to maintain balance.
4. Perform movement control forwards and backwards, remembering that
the movement of the body should not be abrupt.
5: Check the left and right steering by turning each part of the scooter.
6: To get off, wait until the scooter is in the balanced position. Lower one
foot back and then the other.
IMPORTANT: Never drive violently when driving fast. Never drive sideways
or turn on a slope.
IT WILL NOT WORK:
- If the system detects an error during operation, the scooter will warn you
in different ways such as not allowing driving, an alarm warning light will
sound, or an intermittent alarm beep, etc.
- When riding the scooter if the platform moves forward or back more than
10 degrees the scooter will not work.
- If the battery charge is too low.
- During charging.
- During operation, if it is overturned, its operation will be stopped.
- Over-speed.
- If the tire is stuck; Two seconds later the scooter will go into off mode.
- Overuse, for example, by continued use when climbing a steep slope, etc.

Publicidad

loading