Descargar Imprimir esta página

Livoo DOM475 Manual De Instrucciones página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
Before use
Remove all packaging and clean the fridge respecting below cleaning tips. Place it in a dry, ventilated
area.
This product is suitable for storing foods and beverages such as fruits, vegetables, soft drinks, etc. when
refrigerated. Fresh food should not be stored for a long time. Do not put carbonated beverages in while
heating to avoid bursting.
Use of the device
Ensure the function switch and power switch are in the "OFF" position.
Insert the plug according to the electrical connection instructions and power on (figure 2).
Connect the device to the mains or to the cigarette lighter (figure 2).
Set the function switch to your needed "COLD" or "HOT" position. The indicator light is on (green means
cooling, red means heating), the fan is working and the refrigerator is ready for use.
Turn off
If you need to turn off the appliance temporarily, unplug it after turning the switches to the OFF position. If
you unplug the appliance for more than half an hour, remove the food from the fridge.
Notes: 2 in 1 fridge is not designed to cool hot food quickly or heat cold food quickly, but to ensure that
cold food or hot food can continue to maintain the original temperature when transferred. It may take a
long time to cool hot food or reheat cold food.
If you want to switch from the cooling function to the heating function while the appliance is in operation,
you must first set the switch to the "OFF" position and then to the chosen function after 30 minutes.
When the cooling function is activated, freezing and condensation may occur.
In summer, due to the high ambient temperature, it is normal for the interior temperature of the unit to
be higher.
Cleaning and maintenance
Unplug the appliance before cleaning and allow it to cool down.
When cleaning, make sure that water does not get into the live parts.
Use a clean, damp cloth to wipe the refrigerator. Dry it thoroughly before further use. Do not use sponges
or abrasive agents.
Energy-saving points
Place the refrigerator in a dry and well-ventilated place, ensure the refrigerator is not near heat sources
and is not exposed to direct sunlight.
High temperature items should be cooled to room temperature before putting into the refrigerator.
Minimize the door opening time of the refrigerator.
During power outage
Reduce times of opening door of the refrigerator, avoid putting in new items (to prevent internal
temperature from rising faster).
If you know you're going to have a power outage, set your refrigerator to a lower temperature ahead of
time.
Problems
The indicator light does not light up,
the fan does not work
Reasons
Not plugged in properly
Power outage
Not power on
www.livoo.fr
Solutions
Plug in the power socket;
Check whether there is a power
failure
Check whether it is powered on
Check whether the fuse at the
cigarette lighter is damaged

Publicidad

loading