PNI P17UV Manual De Usuario página 17

Manually enter the frequency 432.6125:
- Switch the transceiver to frequency mode (VFO).
- Press the EXIT key until the indicator arrow is next to
the frequency you want to change.
Press the keys [4][3][2][6][1][2][5].
WARNING
The fact that you can manually enter a frequency does not mean that you are automatically
authorized to use that frequency. The transmission on frequencies for which you do not have a
license is illegal. The reception, on the other hand, is authorized in most countries. Consult the
legislation of the country where you are.
Channel mode (MR)
Using channel mode requires programming some
channels. Once you have programmed the channels,
use the keys ▲/▼to navigate between channels.
Note: If you have channels set to low transmit power (L), you can use the #SCAN key to
temporarily switch to high power.
17 User manual