DCS codes can be added to channels to create a sort of private channel. Thus, you can
communicate with other users who are on the same channel and have set the same DCS code.
Options:
•
Off
•
D023N-D754N (normal DCS), D023I-D754I (inverted DCS).
Disables the transceiver speaker in the absence of a specific low level digital signal. If the
transceiver you are listening to does not transmit this specific signal, you will not hear anything.
11. Rx CTCSS
Shortcut [MENU] [11]
Like DCS codes, CTCSS tones can be added to channels to create private channels.
Options:
•
Off
•
67.0 - 254.1Hz
Disables the transceiver speaker in the absence of a specific continuous signal that cannot be
heard (non-audible). If the transceiver you are listening to does not transmit this specific and
continuous signal, you will not hear anything.
33
User manual