Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and maintenance
CLEANING AND MAINTENANCE
(Fig. H)
Incorrect use. Risk of damage to
the surfaces.
• Do not use steam jets to clean
the appliance.
• Do not use cleaning products
containing chlorine, ammonia
or bleach on parts with metal
surface finishes (e.g. anodised,
nickel or chrome-plated).
• Do not use abrasive or corrosive
d e t e r g e n t s ( e . g . p o w d e r
products, stain removers and
metal scourers).
• Do not use rough or abrasive
materials or sharp metal
scrapers.
Cleaning the motor base
To keep the external surfaces in good
condition, they must be cleaned regularly after
all use and when they have cooled down.
Clean with a soft, damp cloth and neutral
detergent.
Sharp blades. Cutting hazard.
• Do not touch the blades.
EN - 14
Cleaning the blender
• The blender, the jug lid (2) and the
measuring cup (1) are dishwasher safe or
can be washed using the pre-set Autoclean
program (See "Controls Description")
• Make sure that the parts are completely dry
before fitting them back on the blender.
Cleaning the accessories
Never immerse the vacuum pump
(9)* in water or any other liquid. It
is not dishwasher safe.
• The vacuum pump (10)* internal cap is
dishwasher safe. For thorough cleaning,
remove the valve and wash it by hand.
• The vacuum pump (9)*body can be
washed by hand in hot water and neutral
detergent, NEVER in the dishwasher. Make
sure it is completely dry before every use.
• The tamper (11) and the spatula (12) are
dishwasher safe.
• The brush (13) can be washed by hand in
hot water and neutral detergent, NEVER in
the dishwasher.
Publicidad
