Makita DCL182 Manual De Instrucciones página 10

3
► 1 . Dust stopper 2. Paper pack 3. Groove
2. Insert the protrusion of the paper pack into the
groove in the dust stopper as shown in the figure.
► 1 . Lower groove
3. There is no distinction between the upper and
lower sides of the paper pack. You may insert its
protrusion of any side into the lower groove of the
dust stopper.
4. Overlap the frame of dust stopper with that of the
paper pack.
1
2
1
10 ENGLISH
1
► 1 . Cleaner cavity
5. Place the dust stopper and the paper pack
together into the cleaner cavity in the same direc-
tion of arrow on the dust stopper. Insert them all
the way into the slots in the cleaner cavity.
6. Place the entire container part of the paper pack
inside the tool itself.
7. Close the front cover completely.
CAUTION:
• Forgetting to install the dust bag or the paper
pack, failure to insert the dust stopper together
with the dust bag or the paper pack all the way
into the slots or using a broken or ripped bag,
may allow dust to get into the motor. This may
result in motor failure.
• Do not fold the cardboard at its opening when
installing the paper pack.
• Never throw away the dust stopper because it
needs to be used repeatedly whenever either
the dust bag or the paper pack is used.
• The paper pack for the cleaner is an important
component for maintaining the tool perfor-
mance. Using other than the genuine paper
pack may cause smokes or ignition.