Makita DCL182 Manual De Instrucciones página 13

Removing and installing the sponge filter
1
► 1 . Sponge filter
To remove the sponge filter, remove the dust bag or
paper pack and then pinch and take it out.
► 1 . Recessed wall
Press in the whole edge of the sponge filter against the
recessed wall inside the dust bag/paper pack mounting area.
CAUTION:
• After cleaning sponge filter, be sure to install
it on the cleaner. If washed in water, dry it up
before installing. An insufficiently dried sponge
filter may shorten the service life of the motor.
Things to Check Before Asking for Repairs
Symptom
Is dust bag or paper pack full of dust ?
Is dust bag clogged ?
Weak suction
power
Is paper pack clogged ?
Is the battery cartridge discharged ?
Not working Is the battery cartridge discharged ?
NOTE:
• Do not attempt to repair cleaner by yourself.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed
by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
1
Area to be investigated
Wall mount for cordless cleaner
Optional accessory
NOTE: The screw to mount the holder is not included.
Prepare a screw which fits with the material to screw
into.
Attach the wall mount for cordless cleaner to a hard
wooden wall, beam or column, where the wall mount
for cordless cleaner can be firmly secured. Always be
sure that the wall mount for cordless cleaner is securely
attached before hanging the cleaner.
1
► 1 . Wall mount for cordless cleaner
CAUTION:
Do not hang the cleaner to the wall
mount violently or hang other appliances than the
cleaner.
Empty dust bag or paper pack.
Dust down or wash the dust
bag.
Replace paper pack.
Charge the battery cartridge.
Charge the battery cartridge.
13 ENGLISH
Fixing method