Publicidad
Idiomas disponibles
Idiomas disponibles
RECOMMENDED COMPRESSED AIR SYSTEM
No.
1
Air tool
2
Air hose
3
Quick coupling
Oiler
4
(for tools with motor)
5
Pressure reducer
MAINTENANCE
Air tools should be operated on air systems that have an automatic oiler.
When using air systems that do not have an automatic oiler, air tools
must be regularly added oil to the air tool via the air connection.
Before first use, add 4 to 5 drops of air device oil to the air connection of
the device.
Do not use engine or gear oil, to oil pneumatic tools; only use oil for
pneumatic tools.
Drain the compressed air system before each use. Water in the air lines
leads to a loss of performance and damage to the air tool.
Clean or replace the air filter on the compressor at the prescribed
intervals.
Only operate the air tool with the maximum pressure specified in the
chapter "Technical data".
DESCRIPTION
1
Trigger
2
Air inlet
3
Vacuum system connection
4
Regulator
5
Hook & Loop pad
ENVIRONMENTAL PROTECTION
Dispose of this product at the end of its working life environmentally.
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and disposed
of in a manner which is compatible with the environment. Contact your local solid waste
authority for recycling information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Designation
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
No.
Designation
6
Drainage/filtering unit
7
Drainage valve
8
Shut-off valve
9
Dryer/filter unit
10
Compressor
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
