PRIXTON SIROCCO Manual Del Usuario página 15

Accessories installing
How to Install Accessories
1. According to the figure in the portable machine dust cup front insert multi-purpose
brush head, the department after the lock up, brush a head in place, you can use
2. According to the figure in the portable machine dust cup front insert over components.
The current lock up after, to take over the installed, you can use the link to brush
accessories like.
3. According to the figure in the control of components connected to the brush to brush
the front of the lock up local, to brush installed can use, according to the need to match
on all kinds of accessoreis. Used for cleaning floor/curtain etc.
Machine cleaning
Cleaning the dust cup
Note
Clean the filter components regularly, because the mites in the abdorbed cotton wool
may not be killed, and will continue to breed. In order to avoid secondary pollution, the
filter components should be cleaned after cleaning, or replace with new filter
components.
1. Turn of
2. As shown in the figure, grasp the handle of the machine with the left hand and rotate
the dust cup countercloclwise with the other hand. After drawing the reference point,
pull out the dust cup outwards.
click
15
click